Loading water data...
Not health advice. Contact your local water utility for concerns.
Data from EPA Water Quality Reports. For official information, contact your water utility or health department.
Analysis of copper contamination levels across Maryland cities
These cities have copper levels above 50% of the EPA limit but within compliance
| City | Level | % of Limit | Population |
|---|---|---|---|
| Hagerstown | 0.759 mg/L | 58.4% | 43,527 |
Complete list of cities where copper has been detected, sorted by level
| City | Level | EPA Limit | % of Limit | Status |
|---|---|---|---|---|
| HagerstownGrade D | 0.759 mg/L | 1.30 mg/L | 58.4% | Warning |
| GermantownGrade C- | 0.552 mg/L | 1.30 mg/L | 42.5% | Safe |
| South LaurelGrade C+ | 0.471 mg/L | 1.30 mg/L | 36.3% | Safe |
| ReisterstownGrade B+ | 0.328 mg/L | 1.30 mg/L | 25.2% | Safe |
| SevernGrade C+ | 0.0005 mg/L | 0.0020 mg/L | 24.5% | Safe |
| AnnapolisGrade B+ | 0.0004 mg/L | 0.0020 mg/L | 22.4% | Safe |
| ParkvilleGrade B | 0.261 mg/L | 1.30 mg/L | 20.1% | Safe |
| HyattsvilleGrade B- | 0.0004 mg/L | 0.0020 mg/L | 20.1% | Safe |
| ColumbiaGrade B- | 0.234 mg/L | 1.30 mg/L | 18.0% | Safe |
| Ellicott CityGrade A | 0.227 mg/L | 1.30 mg/L | 17.4% | Safe |
| Severna ParkGrade A- | 0.0003 mg/L | 0.0020 mg/L | 17.0% | Safe |
| CatonsvilleGrade A | 0.203 mg/L | 1.30 mg/L | 15.6% | Safe |
| Takoma ParkGrade A- | 0.202 mg/L | 1.30 mg/L | 15.6% | Safe |
| BethesdaGrade A- | 0.0003 mg/L | 0.0020 mg/L | 14.9% | Safe |
| Silver SpringGrade A- | 0.0003 mg/L | 0.0020 mg/L | 14.3% | Safe |
| EastonGrade B+ | 0.186 mg/L | 1.30 mg/L | 14.3% | Safe |
| CumberlandGrade A+ | 0.0003 mg/L | 0.0020 mg/L | 13.6% | Safe |
| WestminsterGrade A | 0.0003 mg/L | 0.0020 mg/L | 13.3% | Safe |
| TowsonGrade B+ | 0.157 mg/L | 1.30 mg/L | 12.1% | Safe |
| LaurelGrade A | 0.145 mg/L | 1.30 mg/L | 11.2% | Safe |
| CarneyGrade B+ | 0.146 mg/L | 1.30 mg/L | 11.2% | Safe |
| GaithersburgGrade A | 0.0002 mg/L | 0.0020 mg/L | 10.6% | Safe |
| College ParkGrade A- | 0.135 mg/L | 1.30 mg/L | 10.4% | Safe |
| GreenbeltGrade A | 0.132 mg/L | 1.30 mg/L | 10.2% | Safe |
| WaldorfGrade A- | 0.131 mg/L | 1.30 mg/L | 10.1% | Safe |
Showing 25 of 35 cities. View individual city pages for detailed reports.
Copper is essential in small amounts, but elevated levels can cause gastrointestinal distress including nausea, vomiting, and diarrhea. Long-term exposure can cause liver or kidney damage. People with Wilson's disease are particularly vulnerable. Very high levels can give water a blue-green color and metallic taste.
Corrosion of household plumbing systems; erosion of natural deposits; copper pipes
Based on our analysis of EPA Safe Drinking Water Information System (SDWIS) data and local water utility reports,copper has been detected in 35 Maryland water systems. The average level across all tested cities is 16% of the EPA Maximum Contaminant Level (MCL), with the highest detection at 58.4% of the limit.
The EPA action level for copper is 1.3 mg/L. The EPA MCL for copper is 1.3 mg/L. This limit is set to protect public health based on available scientific evidence about the contaminant's health effects.
35 Maryland cities have copper detected in their water supply. All tested cities are within EPA safety limits.
Gastrointestinal distress, liver and kidney damage with long-term exposure. The most vulnerable groups include people with wilson's disease and infants under 1 year.
The most effective methods for removing copper include Reverse Osmosis, Distillation, Ion Exchange. Look for filters certified by NSF/ANSI for copper reduction.
The EPA Maximum Contaminant Level (MCL) for copper is 1.3 mg/L.The EPA action level for copper is 1.3 mg/L.
Recommended filtration methods for copper removal:
Removes 97-98% of copper
Very effective
Water softeners can help